Skip to main content

View, edit and assign resident indicators

Find out how to view, filter, edit and assign the indicators in a resident's clinical profile.

L
Written by Lauren Camish

Resident indicators help staff quickly recognise important clinical details about a resident. Use the steps below to find the indicators you need, filter them and assign them so the most relevant information is easy to find.

Follow along with our video guide:

Open a resident's indicators

You can view a resident's indicators from their clinical profile.

  1. Click Resident, then click the relevant resident.

  2. Click Clinical, then scroll to the Resident Indicators section.

  3. Click the arrow icon next to Resident Indicators to filter or view them.


Filter indicators

Make sure the filters show all indicators before you assign them.

  • Set the Status and Resident Indicator Group filters to Show All.

⚠️Important: If set incorrectly, you may not see all indicators. The available count should show 68 of 68.

Filter groups

There are two filter groups available:

  • Status: Controls which indicators are displayed:

    • All: Shows all indicators enabled for the home.

    • Enabled: Shows indicators that are enabled for the individual.

    • Disabled: Shows indicators that aren't enabled for the individual.

  • Resident Indicator Group: Allows filtering by specific groups, such as risk indicators.


Choose where indicators appear

When you assign an indicator, you can control where it appears.

Status

Where it appears

Enabled only

In the resident indicator box only.

Enabled and Header Visible

In both the header and the indicator box.


Assign and edit resident indicators

Assigning the correct indicators ensures they appear in the resident header, making key details visible to all staff.

  1. Scroll down to find the required indicator, then click Edit.

  2. To assign or remove an indicator:

    • Assign: Select the Enabled checkbox and Header Visible, as required.

    • Remove: Clear the Enabled checkbox and Header Visible, as required.

  3. Click Save.

Did this answer your question?